| Printer Method |
Direct Thermal Line Printing |
| Print Resolution |
203 dpi |
| Speed |
TRUE Print Speed |
Up to 250mm/second |
| Paper Feed Speed |
Up to 300mm/second |
| Software Control |
Logo Store |
Epson compatible – up to 512kB / 9,025 logos (new) |
| Emulations |
ESC/POS™ |
| Code pages |
40 + 1 blank |
| Interface |
USB / Serial 25pin Dual Interface or USB / Parallel Dual Interface or Ethernet Interface |
| Windows Driver |
ESC/POS™ with StarPRNT Intelligence & config utility |
| Drivers available |
Windows XP SP3, Vista 32/64 SP2, 7 32/64 None SP/SP1
No Star Line mode available |
| Character Size / Line Spacing |
Font A: 12 x 24 / Font B: 9 x 24 / Font A: 42 / 48 (80mm),30 / 33 (58mm)
Font B : 56 / 64 (80mm), 40 / 45 (58mm) (Selectable by Memory Switch) |
| Compressed Print |
Vertical 50%, Horizontal 67% (by Firmware) |
| Barcodes |
1D x 9 versions / 2D - PDF417 |
| Paper |
Width |
58 / 80mm (80mm default with 58mm guide) |
| Printable Width |
64mm / 45mm
(72mm / 50.8mm Selectable by Memory Switch) |
| Roll Diameter |
up to 102mm |
| Thickness |
0.065 ~ 0.085mm (0.057 ~ 0.065mm special paper only) |
| Top Margin |
Approx. 11mm |
| Paper Sensors |
Photo PE sensor: Standard |
| Power Supply |
PS60 supplied in box |
| Input / Supply Voltage |
100V (-10%) to 240V (+10%) / 24V DC |
| Reliability |
60 million lines MCBF |
| Auto-Cutter |
Partial Cut (One-Point Center) / Guillotine Type |
| Min. Cut Length |
24mm (0.065mm ≦ paper thickness ≦ 0.085mm) |
| Auto-Cutter Life |
1 million cuts |
| Print Head Life |
100 Km (using recommended paper) |
| Additional Information |
Simplified Tear-Bar |
Supported |
| Vertical Use |
Not supported (only up to 45 degrees) |
| Dimensions |
142 (W) x 212 (D) x 149 (H) mm |
| Weight |
1.34 kg (only printer except roll paper) |
